1.4x1 inch, HCMOS or Sine Wave, OCXO
| Parameter | Symbol | Minimum | Typical | Maximum | Unit | Notes |
|---|---|---|---|---|---|---|
| Frequency Range | FR | 10 | 100 | MHz | ||
| Frequency vs. Supply Voltage | -1 | +1 | ppb | |||
| Frequency vs. Load | ΔFLOAD/F | -1 | +1 | ppm | ||
| Operating Temperature | TA | -40 | +85 | °C | Consult Factory | |
| Aging | -1.0 | +1.0 | ppm | AT-Cut Daily | ||
| Aging | -5 | +5 | ppm | AT-Cut Yearly | ||
| Aging | -1.0 | +1.0 | ppm | SC-Cut Daily | ||
| Aging | 0.1 | +0.1 | ppm | SC-Cut Daily | ||
| Aging | -0.3 | +0.3 | ppm | SC-Cut Yearly | ||
| Symmetry (Duty Cycle) | 40 | 60 | % | |||
| Rise/Fall Time | 3 | 7 | ns | |||
| Logic "1" Level | -0.2 | V | ||||
| Logic "0" Level | 0.2 | Volts | ||||
| Logic "0" Level | 0.2 | V | ||||
| Output Load | 10 | pF | ||||
| Output Load | 50 | Ω | ||||
| Input Impedance | 20 | kΩ/pF | ||||
| Phase Noise | -80 | 1 Hz Typical | ||||
| Phase Noise | -115 | 10 Hz Typical | ||||
| Phase Noise | -140 | 100 Hz Typical | ||||
| Phase Noise | -145 | 1 kHz Typical | ||||
| Phase Noise | -150 | 10 kHz | ||||
| Phase Noise | -80 | 1 Hz AT-Cut | ||||
| Phase Noise | -115 | 10 Hz AT-Cut | ||||
| Phase Noise | -140 | 100 Hz AT-Cut | ||||
| Phase Noise | -145 | 1 kHz AT-Cut | ||||
| Phase Noise | -150 | 10 kHz AT-Cut | ||||
| Phase Noise | -90 | 1 Hz SC-Cut | ||||
| Phase Noise | -120 | 10 Hz SC-Cut | ||||
| Phase Noise | -140 | 100 Hz SC-Cut | ||||
| Phase Noise | -150 | 1 kHz SC-Cut | ||||
| Phase Noise | -155 | 10 kHz SC-Cut |
| Parameter | Method/Condition | Note |
|---|---|---|
| Vibration | MIL-STD-202, Methods 201 & 204 (10 g from 10 Hz to 2000 Hz) | |
| Hermeticity | MIL-STD-202, Method 112 (1 x 10^-8 atm. cc/s of helium) | |
| Solderability | EIAJ-STD-002 | |
| Max Soldering Conditions | +260 °C for 10 seconds maximum |
Please refer to the Datasheet.
Please refer to the Datasheet.